Chain for Forklifts

Chains for Forklift - The life of lift chains on lift trucks can actually be lengthened significantly with good maintenance and care. Like for instance, correct lubrication is actually the most efficient technique in order to prolong the service capability of this particular part. It is really vital to apply oil periodically making use of a brush or other lube application device. The frequency and volume of oil application has to be sufficient in order to prevent any rust discoloration of oil in the joints. This reddish brown discoloration normally signals that the lift chains have not been properly lubricated. If this particular condition has occurred, it is really essential to lubricate the lift chains as soon as possible.

Throughout lift chain operation it is typical for some metal to metal contact to happen that can lead to a few components to wear out in the long run. When there is 3% elongation on the lift chain, it is considered by industry standards to have worn out the chain. In order to avoid the scary possibility of a catastrophic lift chain failure from taking place, the maker greatly recommends that the lift chain be replaced before it reaches 3 percent elongation. The lift chain lengthens because of progressive joint wear which elongates the chain pitch. This elongation is capable of being measured by placing a certain number of pitches under tension.

One more factor to ensuring correct lift chain maintenance is to check the clevis pins on the lift chain for signs of wear and tear. The lift chains have been assembled so that the tapered faces of the clevis pin are lined up. Generally, rotation of the clevis pins is commonly caused by shock loading. Shock loading takes place when the chain is loose and then suddenly a load is applied. This causes the chain to go through a shock as it 'snaps' under the load tension. Without the correct lubrication, in this particular situation, the pins could rotate in the chain's link. If this scenario happens, the lift chains must be replaced right away. It is very important to always replace the lift chains in pairs to ensure even wear.


Click to Download the pdf

Forklift Parts

Parts for Knuckle Boom Lift

Knuckle Boom Lift Parts - Construction businesses usually need to transport, carry and lift very heavy cargo. Load sizes from five to ten tons are not unheard of and this needs to be completed by utilizing strong and reliable equipment that can lift the cargo and support itself. To resolve these issues, very large Boom Trucks were manufactured to complete...

More

---

Rough Terrain Forklift Parts

Parts for Rough Terrain Forklift - There are in reality two kinds of lift trucks within the manufacturing business, the rough terrain model and the industrial model. Rough terrain lift trucks appeared in the 1940's built primarily for use on uneven surfaces, best for lumberyards and building sites, offering lifting muscle when there was no paved surface accessible. Rough terrain...

More

---

Seat for Forklifts

Seat for Forklift - A strong surface to sit upon is known as a seat. These Seats are normally raised above floor level and the majority of seats use four legs and could carry a single individual. A stool is a seat that does not have a back or any arm rests. A seat that has folding action and an...

More

---

Reach Truck Attachment

Reach Truck Attachment - Reach trucks are loading devices used by types of businesses that keep up a warehouse facility or supply center involving the organization of completed goods and cargo on pallets which are inserted into lofty shelving units. This device provides simple and reliable retrieval of the loaded pallets at the same time as ensuring economical storage of...

More

---

Skytrack Part

Skytrack Part - SkyTrak comes from a top-selling telehandler which is amongst the most popular within the industry, offering an operator friendly and durable solution. There are 3 steering modes outfitted on each and every model and also comes along with a Cummins engine. SkyTrak telehandlers could provide the maneuverability and the power needed to be able to deal with...

More

---

Daewoo Forklift Attachments

Daewoo Forklift Attachments - Kim Woo-Jung, the son of the Provincial Governor of Daegu, founded the Daewoo group in March of nineteen sixty seven. He first graduated from the Kyonggi High School and after that went onto the Yonsei University in Seoul where he completed an Economics Degree. Daewoo became one of the Big Four chaebol in South Korea. Growing...

More

---

Parts for Electric Forklift

Electric Forklift Part - The most common way to charge the industrial batteries that power electrical lift trucks is to use a charging station. These pieces of equipment usually have two 8-foot cords which hook up to the battery. The latest units are equipped with an automatic charge shut off. This charges the battery hard for 6 hours, afterward at...

More

---

LPG Forklift Attachments

Attachments for LPG Forklift - Liquefied petroleum is utilized as a fuel in heating vehicles and appliances. It is an extremely combustible mix of hydrocarbon gases, increasingly used as a refrigerant and an aerosol propellant. Liquefied petroleum gas or otherwise known as LPG, is replacing chlorofluorocarbons as a way to be able to lessen ozone layer damage. Normally referred to...

More

---